Employees assigned to rig loads or direct crane movements need the knowledge and skills to perform those tasks safely. For construction operations covered by OSHA’s Cranes and Derricks standard, specific circumstances require qualified riggers and qualified signal persons.
The requirement depends on the work being performed—not simply the employee’s job title.
KARM Safety Solutions helps employers prepare crews for these responsibilities through Rigger and Signal Person training grounded in practical equipment and jobsite experience.
What Is the Difference Between a Rigger and a Signal Person?
These roles work closely together, but they have different responsibilities.
| Role | Main responsibility |
|---|---|
| Rigger | Selects and uses appropriate rigging to attach and secure a load for lifting. |
| Signal person | Communicates directions to the crane operator using the signaling methods established for the operation. |
One employee may perform both roles if qualified for each responsibility and able to carry them out safely. Being qualified as a rigger does not automatically qualify someone as a signal person.
Who Needs Rigger Training?
Employees who select, inspect, attach, or use slings and rigging hardware need instruction appropriate to their assignments.
Depending on their duties, this may include:
- Construction laborers attaching loads to cranes.
- Ironworkers handling structural steel.
- Utility crews lifting poles, equipment, or materials.
- Millwrights and maintenance employees moving machinery.
- Workers handling precast concrete or other construction components.
- Employees who assemble or disassemble cranes.
These are examples of workers who may need training. The specific qualification requirements depend on the operation and applicable rules.
When Does OSHA Require a Qualified Rigger?
Under the federal construction crane standard, employers must use qualified riggers for rigging work during crane assembly and disassembly.
Qualified riggers are also required when workers within the load’s fall zone are hooking, unhooking, or guiding a load, or making its initial connection to a component or structure. A fall zone is the area where suspended materials could reasonably fall in an accident.
Does Every Rigger Need a National Certification?
Federal OSHA does not require every qualified rigger to hold a third-party rigger certification.
The employer must determine whether the person is qualified for the particular rigging work. Training, experience, demonstrated ability, and relevant credentials can support that determination.
Someone qualified to rig routine loads may need additional training and experience before handling an unfamiliar, unusually shaped, or complex load. Completing a course does not automatically qualify a person for every rigging assignment.
Who Needs Signal Person Training?
Employees assigned to direct crane movements must understand the signals they use and how their directions affect equipment and load movement.
Under OSHA’s construction crane standard, a signal person must be provided when:
- The operator cannot fully see the point of operation, including the load’s travel or placement area.
- The equipment is traveling and the operator’s view in the direction of travel is obstructed.
- The operator or person handling the load determines that a signal person is necessary because of site-specific safety concerns.
This means signal person responsibilities can arise on everyday lifts—not only large or complicated projects.
Is Knowing Hand Signals Enough?
Knowing hand signals is only part of the qualification process.
For construction work covered by OSHA’s signal person requirements, the individual must understand the signaling methods used, apply them competently, understand relevant equipment operations and limitations, and know the applicable signaling requirements.
Qualification includes an oral or written test and a practical test. Employers must use a qualified evaluator and have documentation available at the site identifying the signaling types for which the person is qualified.
Can an Employer Evaluate Its Own Signal Persons?
Yes. OSHA allows assessment by either a third-party qualified evaluator or the employer’s qualified evaluator.
However, an assessment by the employer’s own qualified evaluator is not portable: another employer cannot use that assessment to satisfy its qualification obligation.
Employers should understand what a training provider’s course includes, who performs the qualification assessment, and what the resulting documentation establishes.
Do These Same Rules Apply to Every Workplace?
The specific federal qualification requirements discussed above come from 29 CFR 1926 Subpart CC—Cranes and Derricks in Construction.
Manufacturing, warehousing, maritime operations, and other workplaces may be covered by different standards. Employers must identify the rules applicable to their equipment, industry, and tasks rather than assume the construction requirements apply identically everywhere.
State-plan requirements and project or customer requirements may also affect what training and documentation an employer needs.
Does Online Training Make Someone Qualified?
Online instruction can help employees build knowledge before practical instruction and assessment.
However, a course completion certificate alone does not establish that an employee can safely perform every rigging or signaling assignment.
For signal persons covered by the construction crane standard, the required qualification process includes practical testing. For riggers, employers must determine whether the employee can properly rig the particular load and perform the assigned work.
Before enrolling employees, ask which instruction, practical activities, evaluations, and documentation are included—and which steps the employer must arrange.
What Makes KARM’s Training Different?
KARM’s training developers bring years of experience operating equipment, conducting jobsite inspections, and helping employers address workplace hazards.
That experience helps connect safety requirements to decisions crews make in the field:
- Is the rigging appropriate for the load?
- Are damaged components being recognized and removed from use?
- Do workers understand how the load could shift?
- Can the operator and signal person communicate clearly?
- Does the crew know when to stop and reassess?
Safety requirements provide the foundation. KARM’s field experience helps make the lessons practical and relevant.
Get Rigger and Signal Person Training for Your Crew
If employees attach loads, select rigging, or direct crane movements, review their responsibilities before the next lift.
KARM Safety Solutions can help you discuss training options and understand the next steps for your crew’s assigned work.
Call: 503-304-7037
Visit: KARM Safety Solutions
Explore online courses: training.karmsafety.com
Serving employers in Oregon and Southwest Washington, with online training available nationwide.
Building Safer Workplaces — One Training at a Time.