Can OSHA show up at your workplace without warning? How does OSHA choose which companies to inspect? And what can employers do to prepare?
These are questions every business owner, safety manager, and supervisor should understand.
Many employers assume OSHA only visits businesses after a serious accident or employee complaint. The truth is that OSHA inspections can happen for several reasons, including programmed inspections targeting high-risk industries.
At KARM Safety Solutions, we help employers understand workplace safety requirements, identify hazards, and prepare for inspections before problems become expensive.
Here are seven common reasons OSHA may select your company for an inspection.
1. Imminent Danger: OSHA’s Highest Priority
OSHA gives top priority to situations where workers face an immediate risk of death or serious physical harm.
Examples include:
Employees working at heights without required fall protection.
Workers entering unprotected trenches.
Employees exposed to energized electrical equipment without proper safeguards.
Workers operating equipment in conditions that create an immediate serious hazard.
When OSHA receives credible information about an imminent danger, it may respond quickly.
KARM Safety Tip: Don’t wait for an OSHA inspector to identify a dangerous condition. Regular jobsite inspections can help you discover hazards before someone gets hurt.
2. Workplace Fatalities and Serious Injuries
A workplace fatality or certain serious injuries can trigger an OSHA inspection.
Under federal OSHA reporting requirements, employers generally must report:
A work-related fatality within 8 hours.
A work-related inpatient hospitalization within 24 hours.
A work-related amputation within 24 hours.
A work-related loss of an eye within 24 hours.
These deadlines begin when the employer learns of the reportable event, subject to applicable reporting rules.
OSHA may investigate to determine what happened, whether workplace safety standards were violated, and what corrective actions are needed.
Important: Oregon OSHA and Washington DOSH operate state programs. Employers should verify the reporting procedures and requirements that apply in their state.
Washington employers: Your hospitalization reporting deadline is different. Washington L&I requires reporting a workplace fatality or inpatient hospitalization within eight hours. A non-hospitalized amputation or loss of an eye must be reported within 24 hours. Follow the reporting rules for the jurisdiction covering your workplace.
3. Employee Complaints
Employees have the right to raise workplace safety concerns.
A complaint may involve:
Unsafe equipment.
Missing fall protection.
Inadequate safety training.
Exposure to hazardous chemicals.
Unsafe forklift operation.
Lack of required personal protective equipment.
Not every complaint results in an onsite inspection. Depending on the circumstances, OSHA may investigate onsite or contact the employer to request information and corrective action.
Employers are prohibited from retaliating against employees for exercising protected workplace safety rights.
KARM Safety Tip: Encourage employees to report hazards internally and respond promptly. A strong safety reporting culture helps employers correct problems before injuries occur.
4. High-Hazard Industries and Targeted Inspections
OSHA does not select every workplace randomly.
Federal OSHA uses programmed inspection initiatives to focus on industries, workplaces, or hazards associated with elevated risks.
Examples of targeted concerns include:
Construction fall hazards.
Trenching and excavation.
Silica exposure.
Forklift and powered industrial truck hazards.
Hazardous machinery.
Certain workplaces with high injury and illness rates.
OSHA may use injury data, industry classifications, inspection targeting programs, and other criteria to select establishments.
This means a company may be inspected even if it has never received a complaint or experienced a serious accident.
5. Referrals From Other Agencies or Sources
OSHA can receive referrals about potentially unsafe working conditions from sources such as:
Other government agencies.
Emergency responders.
Healthcare professionals.
Media reports.
Other credible sources.
For example, a serious workplace incident observed by emergency responders could lead to an OSHA referral.
OSHA evaluates referrals to determine the appropriate response.
6. Follow-Up Inspections
If OSHA previously identified violations at your workplace, inspectors may return to determine whether hazards have been corrected.
Follow-up inspections can evaluate whether:
Previously cited hazards were corrected.
Required protective measures are in place.
Employees received necessary training.
The employer completed required abatement.
Employers should maintain documentation of corrective actions, inspections, and training.
7. Local, Regional, or National Emphasis Programs
OSHA uses emphasis programs to focus enforcement resources on particular hazards or industries.
These programs may address issues such as:
Falls in construction.
Trenching and excavation hazards.
Combustible dust.
Heat-related hazards.
Silica exposure.
Other recognized high-risk operations.
Federal OSHA and state OSHA programs may have different enforcement initiatives and inspection targeting priorities.
Employers in Oregon and Washington should stay informed about their respective state safety programs.
Can OSHA Inspect Your Business Without Giving You Notice?
Yes. Most OSHA inspections are conducted without advance notice.
In certain limited circumstances, advance notice may be permitted, but employers should not expect OSHA to schedule a routine enforcement inspection in advance.
When an inspector arrives, employers should understand the inspection process, including the opening conference, walkaround inspection, employee interviews, and closing conference.
Employers also have legal rights during inspections, including rights related to consent and inspection warrants.
What Does OSHA Look for During an Inspection?
The specific focus depends on why OSHA is inspecting the workplace.
Common areas inspectors may review include:
Employee training and qualification records.
Fall protection systems and equipment.
Forklift operator training and evaluations.
Hazard communication programs.
Respiratory protection programs.
Lockout/tagout procedures.
Machine guarding.
Personal protective equipment.
Written safety programs and workplace hazard controls.
Training certificates alone do not establish full compliance. Employers must also ensure that required procedures, equipment safeguards, evaluations, and workplace protections are in place.
How Can Your Company Prepare Before OSHA Arrives?
The best way to prepare for an OSHA inspection is to maintain a safe, compliant workplace every day.
At KARM Safety Solutions, we recommend that employers:
Conduct routine workplace safety inspections.
Review and update written safety programs.
Verify employee training and required evaluations.
Maintain accurate safety documentation.
Correct identified hazards promptly.
Inspect equipment and protective systems regularly.
Provide refresher training when required or when conditions warrant it.
An outside safety consultant can provide a fresh perspective and help identify hazards that may have been overlooked internally.
How KARM Safety Solutions Can Help
Don’t wait for an OSHA inspection to discover a problem.
KARM Safety Solutions provides workplace safety training, consulting, and inspections for businesses throughout Oregon and Southwest Washington, along with online training options for employers nationwide. https://karmsafetysolutions.com/
Our services include:
Jobsite Safety Inspections: Identify workplace hazards and opportunities for corrective action.
Safety Program Development: Develop and review written workplace safety policies and procedures. https://karmsafetysolutions.com/osha-training-services/
Forklift and Equipment Operator Training: Help employers meet applicable operator training requirements.
Competent Person Training: Fall protection, confined spaces, excavation, scaffolding, and more.
Online Safety Training: Convenient courses for individuals and employer teams. https://training.karmsafety.com/
Ongoing Safety Consulting: Support employers with safety programs, documentation, and hazard prevention.
Whether your company has five employees or hundreds, proactive safety management can help protect your workforce and reduce the risk of costly violations.
Is Your Company Ready for an OSHA Inspection?
You don’t have to wait until an OSHA inspector arrives to find out.
Visit our website for more details. https://karmsafetysolutions.com/
Oct. 15, 2026
Beaverton contractor fined $317,587 for repeated job safety violations
Oregon OSHA has fined a Beaverton construction company $317,587 for repeatedly violating job safety requirements, including failing to protect workers from fall hazards that could seriously injure or kill them.
The division a General Construction LLC after an inspection of a jobsite in Molalla where work was being done on the roof of a two-story house.
The company did not implement any fall protection system to protect employees from a potential fall hazard of as much as 19 feet, according to Oregon OSHA’s findings. The employees were working with their full-body fall protection harnesses on, but they had not connected them to any fall protection anchor. General Construction violated an Oregon OSHA rule requiring employers to provide, install, and implement fall protection systems where employees are exposed to a hazard of falling 6 feet or more to a lower level.
In another violation, the company was cited for failing to ensure a ladder extended at least 3 feet above the roof level surface to allow workers to safely mount and dismount the ladder at the top. In yet another violation, the company did not have certification records verifying employees were trained in how to recognize fall hazards and the procedures to be followed to minimize those fall hazards.
The failure to implement any fall protection system and ladder violations were both fifth-repeat violations committed by the company. In this instance, the fifth-repeat violations mean the company was caught violating these safety requirements for the sixth time in less than two years. The violations carry penalties of $167,294 and $138,146, respectively. The certification violation was a first-repeat violation, carrying a penalty of $12,147.
Under Oregon OSHA’s rules, penalties multiply when employers commit repeat offenses.
Under the Oregon Safe Employment Act, workers have a right to safe and healthy working conditions, and to raise concerns free of retaliation. The law requires employers to create and maintain safe and healthy workplaces.
In the construction industry, falls are one of the leading causes of death.
“Any employer who directs employees to work at heights must address potential fall hazards, with an emphasis on prevention,” said Renée Stapleton, administrator for Oregon OSHA. “To repeatedly fail to do so only increases the risk that a worker will be seriously injured or killed.”
Oregon OSHA’s enforcement program is rooted in prevention. The division requires employers to correct violations. The General Construction corrected the fall protection and ladder violations. It is under an order to correct the certification violation.
Employers have 30 calendar days after receiving a citation to file an appeal. The General Construction filed an appeal.
KARM Safety Solutions is here to help before OSHA shows up. Reach out for our services.